Combined Bearings

1. Fixed Combined Bearings

Fixed combined bearings are particularly suitable to be used in forklift masts and in any other moving and handling system, where rolled or extruded profiles are used. The best combination axial part/radial part allows to get high load capacity with extremely small dimensions of the bearing, in addition to easiness of assembling on any kind of structure.

2. Adjustable Combined Bearings

Adjustable combined bearings have the same characteristics as fixed combined bearings. The only difference is the possibility to adjust the distance between bearing and profile through the use of washers.

3, Adjustable Combined Bearings with Eccentric Pin

Adjustable combined bearings with Eccentric Pin have the same characteristics as adjustable combined bearings. In this case, the adjusting of the distance is made through the rotation of the whole axial part (pin and little roll) in the central pivot.

4, Adjustable Combined Bearings with Cap

Adjustable combined bearings with cap made in plastic material maintain high resistance to the load applied on them, and at the same time have an easy system of adjusting the distance between profile and bearing, The adjusting is made through the shifting of a screw which is put in the core of the pivot and lays on the cap.

5, Adjustable Combined Bearings with Steel Cap

As for the previous series, adjustable combined bearings with steel cap maintain a very high resistance to applied loads, and at the same time, they have an easy system of axial adjusting. Also in this case, the adjusting is made through the shifting of a central screw laid on the cap. In comparison to the adjustable execution with plastic cap, this execution can bear much higher axial loads, and therefore its wear is drfinitely lower.

6, Combined bearings for high speed

Combined bearings for high speed maintain the same technical characteristics as fixed combined bearings. They are provided with bronze cages both in the radial and in the axial part, therefore they can rotate at a high speed. They are provided also with Viton seals, so that they can bear heavy working conditions and work on high temperatures.

7, Precision Combined bearings

Precision combined bearings maintain the same characteristics as the previous series. They are manufactured with a wider diameter than the standard ones, because they are used in machined profiles. The very precise coupling between profile and bearing represents a very good and economic solution in comparison to linear guides. These bearings are being used in alternative to the linear guides more often.

8, Combined bearings welded on plate

Usually, combined bearings are welded on plete. This is an ideal solution because the bearing welded on plate is directly on the structure of the plant, with the big advantage that the assembling and disassembling operations are extremely fast and cheap. The combined bearings on plate can be supplied in the fixed or adjustable execution.

9, Adjustable combined bearings for heavy industry

Big size adjustable combined bearings can bear very high loads. They are mainly used for masts of fork lifts up to 50TN and in steel industry where they are used as a wheel for rolling mills carrying cars.